Z-E0064 - 1/10 Baja Designs S8 LED Light Bar (100mm)
RC4WD has teamed up with Baja Designs to offer this awesome new licensed product to the scale community. Will be sure to brighten any project.
Reversible "L" Brackets to fit many Applications
Adjustable "L" Brackets for Rotating Light
16 Individual LED Bulbs
Super Bright Lighting
Vented on Side to Dissipate Heat
Standard Receiver Plug
Connects Directly to Battery
Capable of 11.1 Volts
2.5mm Mounting Holes
Overall Length: 4.4in / 111.2mm
Light Bar Width: 3.93in / 100mm
Overall Height: 0.63in / 16mm
Light Bar Height: 0.39in / 10mm
1x RC4WD 1/10 Baja Designs S8 LED Light Bar (100mm)
1x Baja Designs Decal Sheet
This unit has to be connected directly to 2 or 3 cell lipo to operate properly with 7.4 volts and 11.1 volts.
Use medium grade threadlock on "L"bracket nut to prevent loss and to keep the light in position.
While the lightbar comes with a standard receiver plug, this is only for ease of use. The receiver will not allow enough power for the lightbar and it will be dim. If you want the light to be bright, you will need to power it directly from your battery, or use a BEC to get more power to your receiver.