This is the XERUN AXE Brushless ESC V1.1 combo with 2300kv FOC Sensored Brushless Motor.
Combo Features:Scale : 1/10th
Sensored/Sensorless : SD FOC
Applications: 1/10th Rock Crawler
ESC - AXE
Specifications:Peak Current: 60A/360A
Input Voltage: 2-3S Lipo/6-9 Cell NiMH
BEC Output: Switch Mode:6V/[email protected]
Wires & Connectors:Input Wires: Red-14AWG-200mm*1/ Black-14AWG-200mm*1
Output Wires: No
Input Connectors: XT60
Output Connectors: Solder Posts
ESC Programing via:SET Button on ESC: Not Supported
LED Program Box: Not Supported
LCD Program Box: Not Supported
WiFi Module: Not Supported
Bluetooth Connection: Supported
Firmware:Firmware Upgrade: Supported
MOTOR - XERUN AXE540-2300KV-FOC Sensored Brushless
Features:Word's First FOC brushless system for Rock Crawler. Field-Oriented Control for Super Linearity & High Torque & Extreme Silence.
"POLARITY PROTECTION". Yes. it is not a typo. No more "oops" moment. The chip-type magnetic encoder inside the motor guarantees consistency between three phases’ signals and always outputs the pure and precise signals indicating the rotor position.
The waterproof and dust-proof design (*IP67 standards) allows the AXE brushless power system to be used in all weather & track conditions without any issue of damage caused to the system from water or dust. Damage to the vehicle caused by water, mud, or conditions should be monitored closely when running in muddy, wet, or adverse conditions.
Intelligent torque output & speed closed-loop control for easy control, and consistent motor RPM under all loads.
The motor with 4 poles & 12 magnets, featuring Hobbywing’s “staggered pole” patent has zero cogging effect & torque ripple. It can work smoothly at low speeds. This greatly improves
The maneuverability of rock crawlers at low speeds.
The new sensor harness, which features the plug-and-screw design, has a silicone O ring inside. The new design & O ring not only provide a firm connection between motor and ESC but solve “waterproof” challenge for sensor ports.
Resistance (Ω): 0.037
No-load Current (A): 1.5
Motor Diameter (mm): 36.0 (1.42in)
Motor Length (mm): 48.8 (1.92in)
Shaft Diameter (mm): 3.175 (0.125in)
Shaft Length (mm): 15.5 (0.61in)