This kit includes:
1x LRT Trans Combo
1x Dual Servo Mount for SCX
1x rear trans mount, using the stock SCX skidplate mount holes.
2x mount blocks for the LRT motor mount, fits into the SCX rails, one left and one right.
1x steering pushrod with rod ends
All the hardware for assembly, as well as new hardware for the front shock tower frame mounting.
No changes need to be made to the front shock tower or trackbar on the SCX1 or SCX2 setup. Stock SCX driveshafts can still be used. No link changes are required.
* transfer case half screw requires a 0.050 hex wrench for install (not provided)*