*****If you are NOT using the BowHouseRC 152 axles, but want to use their 170 size or RC4wd axles, please use our CMAX Ultimate Leaf Spring Combo to get the proper spring mounts for the NON 152 axles.*****
Got a Hilux build planned on a CMAX chassis? This brand new kit will combine the specific leaf spring hangers required for the NC Yota 152 axle set from BowHouse RC --LINK HERE-- and our full scale drivetrain in the CMAX for the perfect fit in your Hilux build! The fitment on this setup has no compromises, and keeps huge steering, great suspension movement, and the scale Hilux axle fitment we ALL want - Full tire tuck is on the menu!
It's got a full ladder frame, C-channel design, with a Steel geared scale driveline and transfer case, along with EPIC amounts of adjustment.
Scale Motors are available to slide over your 540 size motor Here at this link.
This CMAX Ultimate Kit includes all the essence of a Scale Truck build. In your package you'll find the following items:
Left and Right Chassis Rails, 19.7 inches long
Front Servo Mount
Front Shock Mounts
Front Leaf Spring mount, and swing hanger
Front 540 size Motor Mount Plate
GCM LowRange Scale Transmission, Steel Gear, 14.3 Gear Ratio
LRT2 Transfer Case, 1.11 Overdrive Front Output
Transfer Case Cross Member
Frame Center Cross Member
Frame Rear Cross Member/Rear Shock Mount
Rear Leaf Spring mount, and swing hanger
Includes All Hex Hardware, 12t Pinion Gear for 1/8 motor shaft, All steel drivetrain gears and shafts, and all aluminum mounts and rails.
To complete this build you need :
1. ECX213000 shocks, which provide the perfect amount of travel, don't leak, and are already filled with oil. Simply remove the coil spring and spring seats, and install on the truck. Very nice little shocks.
2. Tamiya leafs A9808091 and B9808092